OSC.One - Control Sound, Robotics, Smart Home! Mod Apk v1.8 ( Unlimited money )

Details about OSC.One - Control Sound, Robotics, Smart Home!

One scalable, resizable, randomizable, clean and easy to use OSC slider, knob, xy or trigger. Customize the type, behavior, color, size, curve, data type and range. Random features allow Randomizing the control value manually or with a tempo based LFO.

Setting up:
- Set the host computer's IP address and the port it is listening on.
- Match the message address in the app to the message address of the target control.
- Note that in XY mode the controller appends a "/1" message to the X message and a "/2" for the Y message e.g. with a message address set to /1/10000/1 y message is /1/10000/1/2.


Controls:

Settings: Opens the settings window.

Value: Displays the current value of the controller.

BPM: Sets the BPM temp value for the LFO.

Div: Sets the tempo division for the LFO.

LFO: Turns the LFO on/off. Note that when making changes to the BPM or divider settings, the LFO must be restarted for the changes to take effect.

Controller: The controller transmits it's value over OSC based on the settings defined in the settings window.

Random: Randomizes the value of the controller with the maximum random value determined by the range parameter defined in the settings window. When the controller type is set to trigger the random button is deactivated.

Slider Direction: Toggles between a vertical and a horizontal slider.

Knob Endless: Toggles between a finite and endless mode for the knob.

Type: Sets the controller type to either a slider, a knob or a trigger button.

Color: Sets the color scheme of the controller.

Size: Sets the size of the controller. chose between mini, lady, tween and macho modes. When the controller type is set to XY the size controls the XY pointer size.

Curve: Sets the value curve of the controllers from linear to logarithmic to exponential.

Range: The maximum range from 1-100 of the controller's values. This is just a visualization of the range, the actual output range is scaled and depends on the selected data type.

Data: Sets the output data type. Can be set to integer, Int32 and float.

IP: Set the target IP number to transmit the messages to.

Port: Set the target port to transmit the messages to.

Message Address: The OSC message address to which the controller will transmit to.

Confirm Settings: Confirms the settings and returns to the main window. Note that pressing back instead of confirm amounts to canceling the edited settings.

FAQs